openfaas

Description

Deploy a OpenFaaS function using Garden. Requires the openfaas provider to be configured.

Below is the full schema reference. For an introduction to configuring Garden modules, please look at our Configuration guide.

The first section contains the complete YAML schema, and the second section describes each schema key.

openfaas modules also export values that are available in template strings. See the Outputs section below for details.

Complete YAML Schema

The values in the schema below are the default values.

# The schema version of this config (currently not used).
apiVersion: garden.io/v0

kind: Module

# The type of this module.
type:

# The name of this module.
name:

# Specify how to build the module. Note that plugins may define additional keys on this object.
build:
  # A list of modules that must be built before this module is built.
  dependencies:
    - # Module name to build ahead of this module.
      name:

      # Specify one or more files or directories to copy from the built dependency to this module.
      copy:
        - # POSIX-style path or filename of the directory or file(s) to copy to the target.
          source:

          # POSIX-style path or filename to copy the directory or file(s), relative to the build directory.
          # Defaults to the same as source path.
          target:

  # Maximum time in seconds to wait for build to finish.
  timeout: 1200

# A description of the module.
description:

# Set this to `true` to disable the module. You can use this with conditional template strings to disable modules
# based on, for example, the current environment or other variables (e.g. `disabled: ${environment.name == "prod"}`).
# This can be handy when you only need certain modules for specific environments, e.g. only for development.
#
# Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also
# means that the module is not built _unless_ it is declared as a build dependency by another enabled module (in which
# case building this module is necessary for the dependant to be built).
#
# If you disable the module, and its services, tasks or tests are referenced as _runtime_ dependencies, Garden will
# automatically ignore those dependency declarations. Note however that template strings referencing the module's
# service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you need to make
# sure to provide alternate values for those if you're using them, using conditional expressions.
disabled: false

# Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files that
# do *not* match these paths or globs are excluded when computing the version of the module, when responding to
# filesystem watch events, and when staging builds.
#
# Note that you can also _exclude_ files using the `exclude` field or by placing `.gardenignore` files in your source
# tree, which use the same format as `.gitignore` files. See the [Configuration Files
# guide](https://docs.garden.io/v/acorn-0.12/using-garden/configuration-overview#including-excluding-files-and-directories)
# for details.
#
# Also note that specifying an empty list here means _no sources_ should be included.
include:

# Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match these
# paths or globs are excluded when computing the version of the module, when responding to filesystem watch events,
# and when staging builds.
#
# Note that you can also explicitly _include_ files using the `include` field. If you also specify the `include`
# field, the files/patterns specified here are filtered from the files matched by `include`. See the [Configuration
# Files
# guide](https://docs.garden.io/v/acorn-0.12/using-garden/configuration-overview#including-excluding-files-and-directories)
# for details.
#
# Unlike the `modules.exclude` field in the project config, the filters here have _no effect_ on which files and
# directories are watched for changes. Use the project `modules.exclude` field to affect those, if you have large
# directories that should not be watched for changes.
exclude:

# A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific
# branch or tag, with the format: <git remote url>#<branch|tag>
#
# Garden will import the repository source code into this module, but read the module's config from the local
# garden.yml file.
repositoryUrl:

# When false, disables pushing this module to remote registries.
allowPublish: true

# A list of files to write to the module directory when resolving this module. This is useful to automatically
# generate (and template) any supporting files needed for the module.
generateFiles:
  - # POSIX-style filename to read the source file contents from, relative to the path of the module (or the
    # ModuleTemplate configuration file if one is being applied).
    # This file may contain template strings, much like any other field in the configuration.
    sourcePath:

    # POSIX-style filename to write the resolved file contents to, relative to the path of the module source directory
    # (for remote modules this means the root of the module repository, otherwise the directory of the module
    # configuration).
    #
    # Note that any existing file with the same name will be overwritten. If the path contains one or more
    # directories, they will be automatically created if missing.
    targetPath:

    # By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to
    # skip resolving template strings. Note that this does not apply when setting the `value` field, since that's
    # resolved earlier when parsing the configuration.
    resolveTemplates: true

    # The desired file contents as a string.
    value:

# A map of variables scoped to this particular module. These are resolved before any other parts of the module
# configuration and take precedence over project-scoped variables. They may reference project-scoped variables, and
# generally use any template strings normally allowed when resolving modules.
variables:

# Specify a path (relative to the module root) to a file containing variables, that we apply on top of the
# module-level `variables` field.
#
# The format of the files is determined by the configured file's extension:
#
# * `.env` - Standard "dotenv" format, as defined by [dotenv](https://github.com/motdotla/dotenv#rules).
# * `.yaml`/`.yml` - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may
# contain any value type.
# * `.json` - JSON. Must contain a single JSON _object_ (not an array).
#
# _NOTE: The default varfile format will change to YAML in Garden v0.13, since YAML allows for definition of nested
# objects and arrays._
#
# To use different module-level varfiles in different environments, you can template in the environment name
# to the varfile name, e.g. `varfile: "my-module.${environment.name}.env` (this assumes that the corresponding
# varfiles exist).
varfile:

# The names of services/functions that this function depends on at runtime.
dependencies: []

# Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with
# `GARDEN`) and values must be primitives.
env: {}

# Specify which directory under the module contains the handler file/function.
handler: .

# The image name to use for the built OpenFaaS container (defaults to the module name)
image:

# The OpenFaaS language template to use to build this function.
lang:

# A list of tests to run in the module.
tests:
  - # The name of the test.
    name:

    # The names of any services that must be running, and the names of any tasks that must be executed, before the
    # test is run.
    dependencies: []

    # Set this to `true` to disable the test. You can use this with conditional template strings to
    # enable/disable tests based on, for example, the current environment or other variables (e.g.
    # `enabled: ${environment.name != "prod"}`). This is handy when you only want certain tests to run in
    # specific environments, e.g. only during CI.
    disabled: false

    # Maximum duration (in seconds) of the test run.
    timeout: null

    # The command to run in the module build context in order to test it.
    command:

    # Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with
    # `GARDEN`) and values must be primitives.
    env: {}

Configuration Keys

apiVersion

The schema version of this config (currently not used).

Type	Allowed Values	Default	Required
string	"garden.io/v0"	"garden.io/v0"	Yes

kind

Type	Allowed Values	Default	Required
string	"Module"	"Module"	Yes

type

The type of this module.

Type	Required
string	Yes

Example:

type: "container"

name

The name of this module.

Type	Required
string	Yes

Example:

name: "my-sweet-module"

build

Specify how to build the module. Note that plugins may define additional keys on this object.

Type	Default	Required
object	{"dependencies":[]}	No

build.dependencies[]

build > dependencies

A list of modules that must be built before this module is built.

Type	Default	Required
array[object]	[]	No

Example:

build:
  ...
  dependencies:
    - name: some-other-module-name

build.dependencies[].name

build > dependencies > name

Module name to build ahead of this module.

Type	Required
string	Yes

build.dependencies[].copy[]

build > dependencies > copy

Specify one or more files or directories to copy from the built dependency to this module.

Type	Default	Required
array[object]	[]	No

build.dependencies[].copy[].source

build > dependencies > copy > source

POSIX-style path or filename of the directory or file(s) to copy to the target.

Type	Required
posixPath	Yes

build.dependencies[].copy[].target

build > dependencies > copy > target

POSIX-style path or filename to copy the directory or file(s), relative to the build directory. Defaults to the same as source path.

Type	Required
posixPath	No

build.timeout

build > timeout

Maximum time in seconds to wait for build to finish.

Type	Default	Required
number	1200	No

description

A description of the module.

Type	Required
string	No

disabled

Set this to true to disable the module. You can use this with conditional template strings to disable modules based on, for example, the current environment or other variables (e.g. disabled: ${environment.name == "prod"}). This can be handy when you only need certain modules for specific environments, e.g. only for development.

Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also means that the module is not built unless it is declared as a build dependency by another enabled module (in which case building this module is necessary for the dependant to be built).

If you disable the module, and its services, tasks or tests are referenced as runtime dependencies, Garden will automatically ignore those dependency declarations. Note however that template strings referencing the module's service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you need to make sure to provide alternate values for those if you're using them, using conditional expressions.

Type	Default	Required
boolean	false	No

include[]

Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files that do not match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also exclude files using the exclude field or by placing .gardenignore files in your source tree, which use the same format as .gitignore files. See the Configuration Files guide for details.

Also note that specifying an empty list here means no sources should be included.

Type	Required
array[posixPath]	No

Example:

include:
  - Dockerfile
  - my-app.js

exclude[]

Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also explicitly include files using the include field. If you also specify the include field, the files/patterns specified here are filtered from the files matched by include. See the Configuration Files guide for details.

Unlike the modules.exclude field in the project config, the filters here have no effect on which files and directories are watched for changes. Use the project modules.exclude field to affect those, if you have large directories that should not be watched for changes.

Type	Required
array[posixPath]	No

Example:

exclude:
  - tmp/**/*
  - '*.log'

repositoryUrl

A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific branch or tag, with the format: #<branch|tag>

Garden will import the repository source code into this module, but read the module's config from the local garden.yml file.

Type	Required
gitUrl | string	No

Example:

repositoryUrl: "git+https://github.com/org/repo.git#v2.0"

allowPublish

When false, disables pushing this module to remote registries.

Type	Default	Required
boolean	true	No

generateFiles[]

A list of files to write to the module directory when resolving this module. This is useful to automatically generate (and template) any supporting files needed for the module.

Type	Default	Required
array[object]	[]	No

generateFiles[].sourcePath

generateFiles > sourcePath

POSIX-style filename to read the source file contents from, relative to the path of the module (or the ModuleTemplate configuration file if one is being applied). This file may contain template strings, much like any other field in the configuration.

Type	Required
posixPath	No

generateFiles[].targetPath

generateFiles > targetPath

POSIX-style filename to write the resolved file contents to, relative to the path of the module source directory (for remote modules this means the root of the module repository, otherwise the directory of the module configuration).

Note that any existing file with the same name will be overwritten. If the path contains one or more directories, they will be automatically created if missing.

Type	Required
posixPath	Yes

generateFiles[].resolveTemplates

generateFiles > resolveTemplates

By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to skip resolving template strings. Note that this does not apply when setting the value field, since that's resolved earlier when parsing the configuration.

Type	Default	Required
boolean	true	No

generateFiles[].value

generateFiles > value

The desired file contents as a string.

Type	Required
string	No

variables

A map of variables scoped to this particular module. These are resolved before any other parts of the module configuration and take precedence over project-scoped variables. They may reference project-scoped variables, and generally use any template strings normally allowed when resolving modules.

Type	Required
object	No

varfile

Specify a path (relative to the module root) to a file containing variables, that we apply on top of the module-level variables field.

The format of the files is determined by the configured file's extension:

• .env - Standard "dotenv" format, as defined by dotenv.

• .yaml/.yml - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may contain any value type.

• .json - JSON. Must contain a single JSON object (not an array).

NOTE: The default varfile format will change to YAML in Garden v0.13, since YAML allows for definition of nested objects and arrays.

To use different module-level varfiles in different environments, you can template in the environment name to the varfile name, e.g. varfile: "my-module.${environment.name}.env (this assumes that the corresponding varfiles exist).

Type	Required
posixPath	No

Example:

varfile: "my-module.env"

dependencies[]

The names of services/functions that this function depends on at runtime.

Type	Default	Required
array[string]	[]	No

env

Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with GARDEN) and values must be primitives.

Type	Default	Required
object	{}	No

handler

Specify which directory under the module contains the handler file/function.

Type	Default	Required
posixPath	"."	No

image

The image name to use for the built OpenFaaS container (defaults to the module name)

Type	Required
string	No

lang

The OpenFaaS language template to use to build this function.

Type	Required
string	Yes

tests[]

A list of tests to run in the module.

Type	Default	Required
array[object]	[]	No

tests[].name

tests > name

The name of the test.

Type	Required
string	Yes

tests[].dependencies[]

tests > dependencies

The names of any services that must be running, and the names of any tasks that must be executed, before the test is run.

Type	Default	Required
array[string]	[]	No

tests[].disabled

tests > disabled

Set this to true to disable the test. You can use this with conditional template strings to enable/disable tests based on, for example, the current environment or other variables (e.g. enabled: ${environment.name != "prod"}). This is handy when you only want certain tests to run in specific environments, e.g. only during CI.

Type	Default	Required
boolean	false	No

tests[].timeout

tests > timeout

Maximum duration (in seconds) of the test run.

Type	Default	Required
number	null	No

tests[].command[]

tests > command

The command to run in the module build context in order to test it.

Type	Required
array[string]	Yes

tests[].env

tests > env

Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with GARDEN) and values must be primitives.

Type	Default	Required
object	{}	No

Outputs

Module Outputs

The following keys are available via the ${modules.<module-name>} template string key for openfaas modules.

${modules.<module-name>.buildPath}

The build path of the module.

Type
string

Example:

my-variable: ${modules.my-module.buildPath}

${modules.<module-name>.name}

The name of the module.

Type
string

${modules.<module-name>.path}

The local path of the module.

Type
string

Example:

my-variable: ${modules.my-module.path}

${modules.<module-name>.var.*}

A map of all variables defined in the module.

Type	Default
object	{}

${modules.<module-name>.var.<variable-name>}

Type
string | number | boolean | link | array[link]

${modules.<module-name>.version}

The current version of the module.

Type
string

Example:

my-variable: ${modules.my-module.version}

${modules.<module-name>.outputs.endpoint}

The full URL to query this service from within the cluster.

Type
string

Service Outputs

The following keys are available via the ${runtime.services.<service-name>} template string key for openfaas module services. Note that these are only resolved when deploying/running dependants of the service, so they are not usable for every field.

${runtime.services.<service-name>.version}

The current version of the service.

Type
string

Example:

my-variable: ${runtime.services.my-service.version}

Task Outputs

The following keys are available via the ${runtime.tasks.<task-name>} template string key for openfaas module tasks. Note that these are only resolved when deploying/running dependants of the task, so they are not usable for every field.

${runtime.tasks.<task-name>.version}

The current version of the task.

Type
string

Example:

my-variable: ${runtime.tasks.my-tasks.version}