Module Template Configuration

Module templates feature has been deprecated in 0.13 in favor of Config Templates. We recommend updating your existing ModuleTemplate resources to ConfigTemplate resources and use the new RenderTemplate kind to render the templates. For backwards compatibility, the older declarations will still work until version 0.14, and are converted at runtime.

Below is the schema reference for ConfigTemplate configuration files. To learn more about config templates, see the Config Templates guide.

The reference is divided into two sections:

Also check out the templated module type reference.

YAML Schema

The values in the schema below are the default values.

# The schema version of this config (currently not used).
apiVersion: garden.io/v0

kind: ConfigTemplate

# The name of the template.
name:

# Path to a JSON schema file describing the expected inputs for the template. Must be an object schema. If none is
# provided, no inputs will be accepted and an error thrown if attempting to do so.
inputsSchemaPath:

# A list of modules this template will output. The schema for each is the same as when you create modules normally in
# configuration files, with the addition of a `path` field, which allows you to specify a sub-directory to set as the
# module root.
#
# In addition to any template strings you can normally use for modules (see [the
# reference](./template-strings/modules.md)), you can reference the inputs described by the inputs schema for the
# template, using ${inputs.*} template strings, as well as ${parent.name} and ${template.name}, to reference the name
# of the module using the template, and the name of the template itself, respectively. This also applies to file
# contents specified under the `files` key.
#
# **Important: Make sure you use templates for any identifiers that must be unique, such as module names, service
# names and task names. Otherwise you'll inevitably run into configuration errors. The module names can reference the
# ${inputs.*}, ${parent.name} and ${template.name} keys. Other identifiers can also reference those, plus any other
# keys available for module templates (see [the module context reference](./template-strings/modules.md)).**
modules:
  - # The schema version of this config (currently not used).
    apiVersion: garden.io/v0

    kind: Module

    # The type of this module.
    type:

    # The name of this module.
    name:

    # Specify how to build the module. Note that plugins may define additional keys on this object.
    build:
      # A list of modules that must be built before this module is built.
      dependencies:
        - # Module name to build ahead of this module.
          name:

          # Specify one or more files or directories to copy from the built dependency to this module.
          copy:
            - # POSIX-style path or filename of the directory or file(s) to copy to the target.
              source:

              # POSIX-style path or filename to copy the directory or file(s), relative to the build directory.
              # Defaults to the same as source path.
              target:

      # Maximum time in seconds to wait for build to finish.
      timeout: 1200

    # A description of the module.
    description:

    # Set this to `true` to disable the module. You can use this with conditional template strings to disable modules
    # based on, for example, the current environment or other variables (e.g. `disabled: ${environment.name ==
    # "prod"}`). This can be handy when you only need certain modules for specific environments, e.g. only for
    # development.
    #
    # Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also
    # means that the module is not built _unless_ it is declared as a build dependency by another enabled module (in
    # which case building this module is necessary for the dependant to be built).
    #
    # If you disable the module, and its services, tasks or tests are referenced as _runtime_ dependencies, Garden
    # will automatically ignore those dependency declarations. Note however that template strings referencing the
    # module's service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you
    # need to make sure to provide alternate values for those if you're using them, using conditional expressions.
    disabled: false

    # Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files
    # that do *not* match these paths or globs are excluded when computing the version of the module, when responding
    # to filesystem watch events, and when staging builds.
    #
    # Note that you can also _exclude_ files using the `exclude` field or by placing `.gardenignore` files in your
    # source tree, which use the same format as `.gitignore` files. See the [Configuration Files
    # guide](https://docs.garden.io/using-garden/configuration-overview#including-excluding-files-and-directories) for
    # details.
    #
    # Also note that specifying an empty list here means _no sources_ should be included.
    include:

    # Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match
    # these paths or globs are excluded when computing the version of the module, when responding to filesystem watch
    # events, and when staging builds.
    #
    # Note that you can also explicitly _include_ files using the `include` field. If you also specify the `include`
    # field, the files/patterns specified here are filtered from the files matched by `include`. See the
    # [Configuration Files
    # guide](https://docs.garden.io/using-garden/configuration-overview#including-excluding-files-and-directories) for
    # details.
    #
    # Unlike the `modules.exclude` field in the project config, the filters here have _no effect_ on which files and
    # directories are watched for changes. Use the project `modules.exclude` field to affect those, if you have large
    # directories that should not be watched for changes.
    exclude:

    # A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific
    # branch or tag, with the format: <git remote url>#<branch|tag>
    #
    # Garden will import the repository source code into this module, but read the module's config from the local
    # garden.yml file.
    repositoryUrl:

    # When false, disables pushing this module to remote registries.
    allowPublish: true

    # A list of files to write to the module directory when resolving this module. This is useful to automatically
    # generate (and template) any supporting files needed for the module.
    generateFiles:
      - # POSIX-style filename to read the source file contents from, relative to the path of the module (or the
        # ConfigTemplate configuration file if one is being applied).
        # This file may contain template strings, much like any other field in the configuration.
        sourcePath:

        # POSIX-style filename to write the resolved file contents to, relative to the path of the module source
        # directory (for remote modules this means the root of the module repository, otherwise the directory of the
        # module configuration).
        #
        # Note that any existing file with the same name will be overwritten. If the path contains one or more
        # directories, they will be automatically created if missing.
        targetPath:

        # By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to
        # skip resolving template strings. Note that this does not apply when setting the `value` field, since that's
        # resolved earlier when parsing the configuration.
        resolveTemplates: true

        # The desired file contents as a string.
        value:

    # A map of variables scoped to this particular module. These are resolved before any other parts of the module
    # configuration and take precedence over project-scoped variables. They may reference project-scoped variables,
    # and generally use any template strings normally allowed when resolving modules.
    variables:

    # Specify a path (relative to the module root) to a file containing variables, that we apply on top of the
    # module-level `variables` field.
    #
    # The format of the files is determined by the configured file's extension:
    #
    # * `.env` - Standard "dotenv" format, as defined by [dotenv](https://github.com/motdotla/dotenv#rules).
    # * `.yaml`/`.yml` - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may
    # contain any value type.
    # * `.json` - JSON. Must contain a single JSON _object_ (not an array).
    #
    # _NOTE: The default varfile format will change to YAML in Garden v0.13, since YAML allows for definition of
    # nested objects and arrays._
    #
    # To use different module-level varfiles in different environments, you can template in the environment name
    # to the varfile name, e.g. `varfile: "my-module.${environment.name}.env` (this assumes that the corresponding
    # varfiles exist).
    varfile:

    # POSIX-style path of a sub-directory to set as the module root. If the directory does not exist, it is
    # automatically created.
    path:

# A list of Garden configs this template will output, e.g. a set of actions. The schema for each is the same as when
# you create resources normally in configuration files, with the addition of a `path` field, which allows you to
# specify a sub-directory to set as the root location of the resource.
#
# The following resource kinds are allowed: `Build`, `Deploy`, `Run`, `Test` and `Workflow`
#
# __Note that you may _not_ specify Module resources here. Those need to be specified in the `modules` field.__
#
# In addition to any template strings you can normally use for the given configurations (see [the
# reference](./template-strings/README.md)), you can reference the inputs described by the inputs schema for the
# template, using ${inputs.*} template strings, as well as ${parent.name} and ${template.name}, to reference the name
# of the `Render` resource being rendered, and the name of the template itself, respectively.
#
# **Important: Make sure you use templates for any identifiers that must be unique, such as action names.**
# Otherwise you'll inevitably run into configuration errors when re-using the template. The names can reference the
# ${inputs.*}, ${parent.name} and ${template.name} keys, and must be resolvable when parsing the template (meaning no
# action or runtime references etc.). Other identifiers can also reference those, plus any other keys available for
# templates in the given configs (see [the reference](./template-strings/README.md)).
#
# Also note that template strings are not allowed in the following fields: `apiVersion` and `kind`
configs:
  - # The schema version of this config (currently not used).
    apiVersion: garden.io/v0

    # The kind of resource to create.
    kind:

    # The name of the resource.
    name:

    unknown:

Configuration Keys

apiVersion

The schema version of this config (currently not used).

kind

name

The name of the template.

inputsSchemaPath

Path to a JSON schema file describing the expected inputs for the template. Must be an object schema. If none is provided, no inputs will be accepted and an error thrown if attempting to do so.

modules[]

A list of modules this template will output. The schema for each is the same as when you create modules normally in configuration files, with the addition of a path field, which allows you to specify a sub-directory to set as the module root.

In addition to any template strings you can normally use for modules (see the reference), you can reference the inputs described by the inputs schema for the template, using ${inputs.*} template strings, as well as ${parent.name} and ${template.name}, to reference the name of the module using the template, and the name of the template itself, respectively. This also applies to file contents specified under the files key.

Important: Make sure you use templates for any identifiers that must be unique, such as module names, service names and task names. Otherwise you'll inevitably run into configuration errors. The module names can reference the ${inputs.*}, ${parent.name} and ${template.name} keys. Other identifiers can also reference those, plus any other keys available for module templates (see the module context reference).

modules[].apiVersion

modules > apiVersion

The schema version of this config (currently not used).

modules[].kind

modules > kind

modules[].type

modules > type

The type of this module.

Example:

modules:
  - type: "container"

modules[].name

modules > name

The name of this module.

Example:

modules:
  - name: "my-sweet-module"

modules[].build

modules > build

Specify how to build the module. Note that plugins may define additional keys on this object.

modules[].build.dependencies[]

modules > build > dependencies

A list of modules that must be built before this module is built.

Example:

modules:
  - build:
      ...
      dependencies:
        - name: some-other-module-name

modules[].build.dependencies[].name

modules > build > dependencies > name

Module name to build ahead of this module.

modules[].build.dependencies[].copy[]

modules > build > dependencies > copy

Specify one or more files or directories to copy from the built dependency to this module.

modules[].build.dependencies[].copy[].source

modules > build > dependencies > copy > source

POSIX-style path or filename of the directory or file(s) to copy to the target.

modules[].build.dependencies[].copy[].target

modules > build > dependencies > copy > target

POSIX-style path or filename to copy the directory or file(s), relative to the build directory. Defaults to the same as source path.

modules[].build.timeout

modules > build > timeout

Maximum time in seconds to wait for build to finish.

modules[].description

modules > description

A description of the module.

modules[].disabled

modules > disabled

Set this to true to disable the module. You can use this with conditional template strings to disable modules based on, for example, the current environment or other variables (e.g. disabled: ${environment.name == "prod"}). This can be handy when you only need certain modules for specific environments, e.g. only for development.

Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also means that the module is not built unless it is declared as a build dependency by another enabled module (in which case building this module is necessary for the dependant to be built).

If you disable the module, and its services, tasks or tests are referenced as runtime dependencies, Garden will automatically ignore those dependency declarations. Note however that template strings referencing the module's service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you need to make sure to provide alternate values for those if you're using them, using conditional expressions.

modules[].include[]

modules > include

Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files that do not match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also exclude files using the exclude field or by placing .gardenignore files in your source tree, which use the same format as .gitignore files. See the Configuration Files guide for details.

Also note that specifying an empty list here means no sources should be included.

Example:

modules:
  - include:
      - Dockerfile
      - my-app.js

modules[].exclude[]

modules > exclude

Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also explicitly include files using the include field. If you also specify the include field, the files/patterns specified here are filtered from the files matched by include. See the Configuration Files guide for details.

Unlike the modules.exclude field in the project config, the filters here have no effect on which files and directories are watched for changes. Use the project modules.exclude field to affect those, if you have large directories that should not be watched for changes.

Example:

modules:
  - exclude:
      - tmp/**/*
      - '*.log'

modules[].repositoryUrl

modules > repositoryUrl

A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific branch or tag, with the format: #<branch|tag>

Garden will import the repository source code into this module, but read the module's config from the local garden.yml file.

Example:

modules:
  - repositoryUrl: "git+https://github.com/org/repo.git#v2.0"

modules[].allowPublish

modules > allowPublish

When false, disables pushing this module to remote registries.

modules[].generateFiles[]

modules > generateFiles

A list of files to write to the module directory when resolving this module. This is useful to automatically generate (and template) any supporting files needed for the module.

modules[].generateFiles[].sourcePath

modules > generateFiles > sourcePath

POSIX-style filename to read the source file contents from, relative to the path of the module (or the ConfigTemplate configuration file if one is being applied). This file may contain template strings, much like any other field in the configuration.

modules[].generateFiles[].targetPath

modules > generateFiles > targetPath

POSIX-style filename to write the resolved file contents to, relative to the path of the module source directory (for remote modules this means the root of the module repository, otherwise the directory of the module configuration).

Note that any existing file with the same name will be overwritten. If the path contains one or more directories, they will be automatically created if missing.

modules[].generateFiles[].resolveTemplates

modules > generateFiles > resolveTemplates

By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to skip resolving template strings. Note that this does not apply when setting the value field, since that's resolved earlier when parsing the configuration.

modules[].generateFiles[].value

modules > generateFiles > value

The desired file contents as a string.

modules[].variables

modules > variables

A map of variables scoped to this particular module. These are resolved before any other parts of the module configuration and take precedence over project-scoped variables. They may reference project-scoped variables, and generally use any template strings normally allowed when resolving modules.

modules[].varfile

modules > varfile

Specify a path (relative to the module root) to a file containing variables, that we apply on top of the module-level variables field.

The format of the files is determined by the configured file's extension:

  • .env - Standard "dotenv" format, as defined by dotenv.

  • .yaml/.yml - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may contain any value type.

  • .json - JSON. Must contain a single JSON object (not an array).

NOTE: The default varfile format will change to YAML in Garden v0.13, since YAML allows for definition of nested objects and arrays.

To use different module-level varfiles in different environments, you can template in the environment name to the varfile name, e.g. varfile: "my-module.${environment.name}.env (this assumes that the corresponding varfiles exist).

Example:

modules:
  - varfile: "my-module.env"

modules[].path

modules > path

POSIX-style path of a sub-directory to set as the module root. If the directory does not exist, it is automatically created.

configs[]

A list of Garden configs this template will output, e.g. a set of actions. The schema for each is the same as when you create resources normally in configuration files, with the addition of a path field, which allows you to specify a sub-directory to set as the root location of the resource.

The following resource kinds are allowed: Build, Deploy, Run, Test and Workflow

Note that you may not specify Module resources here. Those need to be specified in the modules field.

In addition to any template strings you can normally use for the given configurations (see the reference), you can reference the inputs described by the inputs schema for the template, using ${inputs.*} template strings, as well as ${parent.name} and ${template.name}, to reference the name of the Render resource being rendered, and the name of the template itself, respectively.

Important: Make sure you use templates for any identifiers that must be unique, such as action names. Otherwise you'll inevitably run into configuration errors when re-using the template. The names can reference the ${inputs.*}, ${parent.name} and ${template.name} keys, and must be resolvable when parsing the template (meaning no action or runtime references etc.). Other identifiers can also reference those, plus any other keys available for templates in the given configs (see the reference).

Also note that template strings are not allowed in the following fields: apiVersion and kind

configs[].apiVersion

configs > apiVersion

The schema version of this config (currently not used).

configs[].kind

configs > kind

The kind of resource to create.

configs[].name

configs > name

The name of the resource.

configs[].unknown

configs > unknown

Last updated