exec Run
Description
A simple Run action which runs a command locally with a shell command.
Below is the full schema reference for the action. For an introduction to configuring Garden, please look at our Configuration guide.
exec
actions also export values that are available in template strings. See the Outputs section below for details.
Configuration Keys
type
type
The type of action, e.g. exec
, container
or kubernetes
. Some are built into Garden but mostly these will be defined by your configured providers.
Type | Required |
---|---|
| Yes |
name
name
A valid name for the action. Must be unique across all actions of the same kind in your project.
Type | Required |
---|---|
| Yes |
description
description
A description of the action.
Type | Required |
---|---|
| No |
source
source
By default, the directory where the action is defined is used as the source for the build context.
You can override this by setting either source.path
to another (POSIX-style) path relative to the action source directory, or source.repository
to get the source from an external repository.
If using source.path
, you must make sure the target path is in a git repository.
For source.repository
behavior, please refer to the Remote Sources guide.
Type | Required |
---|---|
| No |
source.path
source.path
source > path
A relative POSIX-style path to the source directory for this action. You must make sure this path exists and is in a git repository!
Type | Required |
---|---|
| No |
source.repository
source.repository
source > repository
When set, Garden will import the action source from this repository, but use this action configuration (and not scan for configs in the separate repository).
Type | Required |
---|---|
| No |
source.repository.url
source.repository.url
source > repository > url
A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific branch or tag, with the format: #<branch|tag>
Type | Required |
---|---|
| Yes |
Example:
dependencies[]
dependencies[]
A list of other actions that this action depends on, and should be built, deployed or run (depending on the action type) before processing this action.
Each dependency should generally be expressed as a "<kind>.<name>"
string, where is one of build
, deploy
, run
or test
, and is the name of the action to depend on.
You may also optionally specify a dependency as an object, e.g. { kind: "Build", name: "some-image" }
.
Any empty values (i.e. null or empty strings) are ignored, so that you can conditionally add in a dependency via template expressions.
Type | Default | Required |
---|---|---|
|
| No |
Example:
disabled
disabled
Set this to true
to disable the action. You can use this with conditional template strings to disable actions based on, for example, the current environment or other variables (e.g. disabled: ${environment.name == "prod"}
). This can be handy when you only need certain actions for specific environments, e.g. only for development.
For Build actions, this means the build is not performed unless it is declared as a dependency by another enabled action (in which case the Build is assumed to be necessary for the dependant action to be run or built).
For other action kinds, the action is skipped in all scenarios, and dependency declarations to it are ignored. Note however that template strings referencing outputs (i.e. runtime outputs) will fail to resolve when the action is disabled, so you need to make sure to provide alternate values for those if you're using them, using conditional expressions.
Type | Default | Required |
---|---|---|
|
| No |
environments[]
environments[]
If set, the action is only enabled for the listed environment types. This is effectively a cleaner shorthand for the disabled
field with an expression for environments. For example, environments: ["prod"]
is equivalent to disabled: ${environment.name != "prod"}
.
Type | Required |
---|---|
| No |
include[]
include[]
Specify a list of POSIX-style paths or globs that should be regarded as source files for this action, and thus will affect the computed version of the action.
For actions other than Build actions, this is usually not necessary to specify, or is implicitly inferred. An exception would be e.g. an exec
action without a build
reference, where the relevant files cannot be inferred and you want to define which files should affect the version of the action, e.g. to make sure a Test action is run when certain files are modified.
Build actions have a different behavior, since they generally are based on some files in the source tree, so please reference the docs for more information on those.
Note that you can also exclude files using the exclude
field or by placing .gardenignore
files in your source tree, which use the same format as .gitignore
files. See the Configuration Files guide for details.
Type | Required |
---|---|
| No |
Example:
exclude[]
exclude[]
Specify a list of POSIX-style paths or glob patterns that should be explicitly excluded from the action's version.
For actions other than Build actions, this is usually not necessary to specify, or is implicitly inferred. For Deploy, Run and Test actions, the exclusions specified here only applied on top of explicitly set include
paths, or such paths inferred by providers. See the Configuration Files guide for details.
Unlike the scan.exclude
field in the project config, the filters here have no effect on which files and directories are watched for changes when watching is enabled. Use the project scan.exclude
field to affect those, if you have large directories that should not be watched for changes.
Type | Required |
---|---|
| No |
Example:
variables
variables
A map of variables scoped to this particular action. These are resolved before any other parts of the action configuration and take precedence over group-scoped variables (if applicable) and project-scoped variables, in that order. They may reference group-scoped and project-scoped variables, and generally can use any template strings normally allowed when resolving the action.
Type | Required |
---|---|
| No |
varfiles[]
varfiles[]
Specify a list of paths (relative to the directory where the action is defined) to a file containing variables, that we apply on top of the action-level variables
field, and take precedence over group-level variables (if applicable) and project-level variables, in that order.
If you specify multiple paths, they are merged in the order specified, i.e. the last one takes precedence over the previous ones.
The format of the files is determined by the configured file's extension:
.yaml
/.yml
- YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may contain any value type. YAML format is used by default..env
- Standard "dotenv" format, as defined by dotenv..json
- JSON. Must contain a single JSON object (not an array).
NOTE: The default varfile format was changed to YAML in Garden v0.13, since YAML allows for definition of nested objects and arrays.
To use different varfiles in different environments, you can template in the environment name to the varfile name, e.g. varfile: "my-action.${environment.name}.env"
(this assumes that the corresponding varfiles exist).
If a listed varfile cannot be found, throwing an error. To add optional varfiles, you can use a list item object with a path
and an optional optional
boolean field.
Type | Default | Required |
---|---|---|
|
| No |
Example:
varfiles[].path
varfiles[].path
varfiles > path
Path to a file containing a path.
Type | Required |
---|---|
| Yes |
varfiles[].optional
varfiles[].optional
varfiles > optional
Whether the varfile is optional.
Type | Required |
---|---|
| No |
build
build
Specify a Build action, and resolve this action from the context of that Build.
For example, you might create an exec
Build which prepares some manifests, and then reference that in a kubernetes
Deploy action, and the resulting manifests from the Build.
This would mean that instead of looking for manifest files relative to this action's location in your project structure, the output directory for the referenced exec
Build would be the source.
Type | Required |
---|---|
| No |
kind
kind
Type | Allowed Values | Required |
---|---|---|
| "Run" | Yes |
timeout
timeout
Set a timeout for the run to complete, in seconds.
Type | Default | Required |
---|---|---|
|
| No |
spec
spec
Type | Required |
---|---|
| No |
spec.shell
spec.shell
spec > shell
If true
, runs file inside of a shell. Uses /bin/sh
on UNIX and cmd.exe
on Windows. A different shell can be specified as a string. The shell should understand the -c
switch on UNIX or /d /s /c
on Windows.
Note that if this is not set, no shell interpreter (Bash, cmd.exe
, etc.) is used, so shell features such as variables substitution (echo $PATH
) are not allowed.
We recommend against using this option since it is:
not cross-platform, encouraging shell-specific syntax.
slower, because of the additional shell interpretation.
unsafe, potentially allowing command injection.
Type | Required |
---|---|
| No |
spec.artifacts[]
spec.artifacts[]
spec > artifacts
A list of artifacts to copy after the run.
Type | Default | Required |
---|---|---|
|
| No |
spec.artifacts[].source
spec.artifacts[].source
A POSIX-style path or glob to copy, relative to the build root.
Type | Required |
---|---|
| No |
spec.artifacts[].target
spec.artifacts[].target
A POSIX-style path to copy the artifacts to, relative to the project artifacts directory at .garden/artifacts
.
Type | Default | Required |
---|---|---|
|
| No |
spec.command[]
spec.command[]
spec > command
The command to run.
Note that if a Build is referenced in the build
field, the command will be run from the build directory for that Build action. If that Build has buildAtSource: true
set, the command will be run from the source directory of the Build action. If no build
reference is set, the command is run from the source directory of this action.
Example: ["npm","run","build"]
Type | Required |
---|---|
| Yes |
spec.env
spec.env
spec > env
Environment variables to set when running the command.
Type | Default | Required |
---|---|---|
|
| No |
Outputs
The following keys are available via the ${actions.run.<name>}
template string key for exec
action.
${actions.run.<name>.name}
${actions.run.<name>.name}
The name of the action.
Type |
---|
|
${actions.run.<name>.disabled}
${actions.run.<name>.disabled}
Whether the action is disabled.
Type |
---|
|
Example:
${actions.run.<name>.buildPath}
${actions.run.<name>.buildPath}
The local path to the action build directory.
Type |
---|
|
Example:
${actions.run.<name>.sourcePath}
${actions.run.<name>.sourcePath}
The local path to the action source directory.
Type |
---|
|
Example:
${actions.run.<name>.mode}
${actions.run.<name>.mode}
The mode that the action should be executed in (e.g. 'sync' or 'local' for Deploy actions). Set to 'default' if no special mode is being used.
Build actions inherit the mode from Deploy actions that depend on them. E.g. If a Deploy action is in 'sync' mode and depends on a Build action, the Build action will inherit the 'sync' mode setting from the Deploy action. This enables installing different tools that may be necessary for different development modes.
Type | Default |
---|---|
|
|
Example:
${actions.run.<name>.var.*}
${actions.run.<name>.var.*}
The variables configured on the action.
Type | Default |
---|---|
|
|
${actions.run.<name>.var.<name>}
${actions.run.<name>.var.<name>}
Type |
---|
|
${actions.run.<name>.outputs.log}
${actions.run.<name>.outputs.log}
The full log output from the executed command. (Pro-tip: Make it machine readable so it can be parsed by dependants)
Type | Default |
---|---|
|
|
Last updated