helm

Modules are deprecated and will be removed in version 0.14. Please use action-based configuration instead. See the 0.12 to Bonsai migration guide for details.

Description

Specify a Helm chart (either in your repository or remote from a registry) to deploy.

Refer to the Helm guide for usage instructions.

Garden uses Helm 3.16.2.

Below is the full schema reference. For an introduction to configuring Garden modules, please look at our Configuration guide.

The first section contains the complete YAML schema, and the second section describes each schema key.

helm modules also export values that are available in template strings. See the Outputs section below for details.

Complete YAML Schema

The values in the schema below are the default values.

kind: Module

# The type of this module.
type:

# The name of this module.
name:

# Specify how to build the module. Note that plugins may define additional keys on this object.
build:
  # A list of modules that must be built before this module is built.
  dependencies:
    - # Module name to build ahead of this module.
      name:

      # Specify one or more files or directories to copy from the built dependency to this module.
      copy:
        - # POSIX-style path or filename of the directory or file(s) to copy to the target.
          source:

          # POSIX-style path or filename to copy the directory or file(s), relative to the build directory.
          # Defaults to the same as source path.
          target:

  # Maximum time in seconds to wait for build to finish.
  timeout: 600

# If set to true, Garden will run the build command, services, tests, and tasks in the module source directory,
# instead of in the Garden build directory (under .garden/build/<module-name>).
#
# Garden will therefore not stage the build for local modules. This means that include/exclude filters
# and ignore files are not applied to local modules, except to calculate the module/action versions.
#
# If you use use `build.dependencies[].copy` for one or more build dependencies of this module, the copied files
# will be copied to the module source directory (instead of the build directory, as is the default case when
# `local = false`).
#
# Note: This maps to the `buildAtSource` option in this module's generated Build action (if any).
local: false

# A description of the module.
description:

# Set this to `true` to disable the module. You can use this with conditional template strings to disable modules
# based on, for example, the current environment or other variables (e.g. `disabled: ${environment.name == "prod"}`).
# This can be handy when you only need certain modules for specific environments, e.g. only for development.
#
# Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also
# means that the module is not built _unless_ it is declared as a build dependency by another enabled module (in which
# case building this module is necessary for the dependant to be built).
#
# If you disable the module, and its services, tasks or tests are referenced as _runtime_ dependencies, Garden will
# automatically ignore those dependency declarations. Note however that template strings referencing the module's
# service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you need to make
# sure to provide alternate values for those if you're using them, using conditional expressions.
disabled: false

# Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files that
# do *not* match these paths or globs are excluded when computing the version of the module, when responding to
# filesystem watch events, and when staging builds.
#
# Note that you can also _exclude_ files using the `exclude` field or by placing `.gardenignore` files in your source
# tree, which use the same format as `.gitignore` files. See the [Configuration Files
# guide](https://docs.garden.io/using-garden/configuration-overview#including-excluding-files-and-directories) for
# details.
#
# Also note that specifying an empty list here means _no sources_ should be included.
#
# If neither `include` nor `exclude` is set, and the module has local chart sources, Garden
# automatically sets `include` to: `["*", "charts/**/*", "templates/**/*"]`.
#
# If neither `include` nor `exclude` is set and the module specifies a remote chart, Garden
# automatically sets `ìnclude` to `[]`.
include:

# Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match these
# paths or globs are excluded when computing the version of the module, when responding to filesystem watch events,
# and when staging builds.
#
# Note that you can also explicitly _include_ files using the `include` field. If you also specify the `include`
# field, the files/patterns specified here are filtered from the files matched by `include`. See the [Configuration
# Files guide](https://docs.garden.io/using-garden/configuration-overview#including-excluding-files-and-directories)
# for details.
#
# Unlike the `scan.exclude` field in the project config, the filters here have _no effect_ on which files and
# directories are watched for changes. Use the project `scan.exclude` field to affect those, if you have large
# directories that should not be watched for changes.
exclude:

# A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific
# branch or tag, with the format: <git remote url>#<branch|tag>
#
# Garden will import the repository source code into this module, but read the module's config from the local
# garden.yml file.
repositoryUrl:

# When false, disables pushing this module to remote registries via the publish command.
allowPublish: true

# A list of files to write to the module directory when resolving this module. This is useful to automatically
# generate (and template) any supporting files needed for the module.
generateFiles:
  - # POSIX-style filename to read the source file contents from, relative to the path of the module (or the
    # ConfigTemplate configuration file if one is being applied).
    # This file may contain template strings, much like any other field in the configuration.
    sourcePath:

    # POSIX-style filename to write the resolved file contents to, relative to the path of the module source directory
    # (for remote modules this means the root of the module repository, otherwise the directory of the module
    # configuration).
    #
    # Note that any existing file with the same name will be overwritten. If the path contains one or more
    # directories, they will be automatically created if missing.
    targetPath:

    # By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to
    # skip resolving template strings. Note that this does not apply when setting the `value` field, since that's
    # resolved earlier when parsing the configuration.
    resolveTemplates: true

    # The desired file contents as a string.
    value:

# A map of variables scoped to this particular module. These are resolved before any other parts of the module
# configuration and take precedence over project-scoped variables. They may reference project-scoped variables, and
# generally use any template strings normally allowed when resolving modules.
variables:

# Specify a path (relative to the module root) to a file containing variables, that we apply on top of the
# module-level `variables` field.
#
# The format of the files is determined by the configured file's extension:
#
# * `.yaml`/`.yml` - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may
# contain any value type. YAML format is used by default.
# * `.env` - Standard "dotenv" format, as defined by [dotenv](https://github.com/motdotla/dotenv#rules).
# * `.json` - JSON. Must contain a single JSON _object_ (not an array).
#
# _NOTE: The default varfile format was changed to YAML in Garden v0.13, since YAML allows for definition of nested
# objects and arrays._
#
# To use different module-level varfiles in different environments, you can template in the environment name
# to the varfile name, e.g. `varfile: "my-module.${environment.name}.env` (this assumes that the corresponding
# varfiles exist).
varfile:

# A valid Kubernetes namespace name. Must be a valid RFC1035/RFC1123 (DNS) label (may contain lowercase letters,
# numbers and dashes, must start with a letter, and cannot end with a dash) and must not be longer than 63 characters.
namespace:

# Manually specify port forwards that Garden should set up when deploying in dev or watch mode. If specified, these
# override the auto-detection of forwardable ports, so you'll need to specify the full list of port forwards to
# create.
portForwards:
  - # An identifier to describe the port forward.
    name:

    # The full resource kind and name to forward to, e.g. Service/my-service or Deployment/my-deployment. Note that
    # Garden will not validate this ahead of attempting to start the port forward, so you need to make sure this is
    # correctly set. The types of resources supported will match that of the `kubectl port-forward` CLI command.
    resource:

    # The port number on the remote resource to forward to.
    targetPort:

    # The _preferred_ local port to forward from. If none is set, a random port is chosen. If the specified port is
    # not available, a warning is shown and a random port chosen instead.
    localPort:

# Optionally override the release name used when installing (defaults to the Deploy name).
releaseName:

# Time in seconds to wait for Helm to complete any individual Kubernetes operation (like Jobs for hooks).
timeout: 300

# Map of values to pass to Helm when rendering the templates. May include arrays and nested objects. When specified,
# these take precedence over the values in the `values.yaml` file (or the files specified in `valueFiles`).
values: {}

# Specify value files to use when rendering the Helm chart. These will take precedence over the `values.yaml` file
# bundled in the Helm chart, and should be specified in ascending order of precedence. Meaning, the last file in
# this list will have the highest precedence.
#
# If you _also_ specify keys under the `values` field, those will effectively be added as another file at the end
# of this list, so they will take precedence over other files listed here.
#
# Note that the paths here should be relative to the _config_ root, and the files should be contained in
# this action config's directory.
valueFiles: []

# Whether to set the `--atomic` flag during installs and upgrades. Set to `true` if you'd like the changes applied
# to be reverted on failure. Set to false if e.g. you want to see more information about failures and then manually
# roll back, instead of having Helm do it automatically on failure.
#
# Note that setting `atomic` to `true` implies `wait`.
atomicInstall: false

# The name of another `helm` module to use as a base for this one. Use this to re-use a Helm chart across multiple
# services. For example, you might have an organization-wide base chart for certain types of services.
# If set, this module will by default inherit the following properties from the base module: `serviceResource`,
# `values`
# Each of those can be overridden in this module. They will be merged with a JSON Merge Patch (RFC 7396).
base:

# A valid Helm chart name or URI (same as you'd input to `helm install`) Required if the action doesn't contain the
# Helm chart itself.
chart:

# The path, relative to the module path, to the chart sources (i.e. where the Chart.yaml file is, if any). Not used
# when `base` is specified.
chartPath: .

# List of names of services that should be deployed before this chart.
dependencies: []

# Specifies which files or directories to sync to which paths inside the running containers of the service when it's
# in sync mode, and overrides for the container command and/or arguments.
#
# Note that `serviceResource` must also be specified to enable sync.
#
# Sync is enabled by setting the `--sync` flag on the `garden deploy` command.
#
# See the [Code Synchronization guide](https://docs.garden.io/guides/code-synchronization) for more information.
sync:
  # Override the default container arguments when in sync mode.
  args:

  # Override the default container command (i.e. entrypoint) when in sync mode.
  command:

  # Specify one or more source files or directories to automatically sync with the running container.
  paths:
    - # Path to a local directory to be synchronized with the target.
      # This should generally be a templated path to another action's source path (e.g.
      # `${actions.build.my-container-image.sourcePath}`), or a relative path.
      # If a path is hard-coded, we recommend sticking with relative paths here, and using forward slashes (`/`) as a
      # delimiter, as Windows-style paths with back slashes (`\`) and absolute paths will work on some platforms, but
      # they are not portable and will not work for users on other platforms.
      # Defaults to the Deploy action's config's directory if no value is provided.
      source: .

      # POSIX-style absolute path to sync to inside the container. The root path (i.e. "/") is not allowed.
      target:

      # Specify a list of POSIX-style paths or glob patterns that should be excluded from the sync.
      #
      # `.git` directories and `.garden` directories are always ignored.
      exclude:

      # The sync mode to use for the given paths. See the [Code Synchronization
      # guide](https://docs.garden.io/guides/code-synchronization) for details.
      mode: one-way-safe

      # The default permission bits, specified as an octal, to set on files at the sync target. Defaults to 0o644
      # (user can read/write, everyone else can read). See the [Mutagen
      # docs](https://mutagen.io/documentation/synchronization/permissions#permissions) for more information.
      defaultFileMode: 420

      # The default permission bits, specified as an octal, to set on directories at the sync target. Defaults to
      # 0o755 (user can read/write, everyone else can read). See the [Mutagen
      # docs](https://mutagen.io/documentation/synchronization/permissions#permissions) for more information.
      defaultDirectoryMode: 493

      # Set the default owner of files and directories at the target. Specify either an integer ID or a string name.
      # See the [Mutagen docs](https://mutagen.io/documentation/synchronization/permissions#owners-and-groups) for
      # more information.
      defaultOwner:

      # Set the default group on files and directories at the target. Specify either an integer ID or a string name.
      # See the [Mutagen docs](https://mutagen.io/documentation/synchronization/permissions#owners-and-groups) for
      # more information.
      defaultGroup:

  # Optionally specify the name of a specific container to sync to. If not specified, the first container in the
  # workload is used.
  containerName:

# [EXPERIMENTAL] Configures the local application which will send and receive network requests instead of the target
# resource specified by `localMode.target` or `defaultTarget`. One of those fields must be specified to enable local
# mode for the action.
#
# The selected container of the target Kubernetes resource will be replaced by a proxy container which runs an SSH
# server to proxy requests.
# Reverse port-forwarding will be automatically configured to route traffic to the locally run application and back.
#
# Local mode is enabled by setting the `--local` option on the `garden deploy` command.
# Local mode always takes the precedence over sync mode if there are any conflicting service names.
#
# Health checks are disabled for services running in local mode.
#
# See the [Local Mode guide](https://docs.garden.io/guides/running-service-in-local-mode) for more information.
#
# Note! This feature is still experimental. Some incompatible changes can be made until the first non-experimental
# release.
localMode:
  # The reverse port-forwards configuration for the local application.
  ports:
    - # The local port to be used for reverse port-forward.
      local:

      # The remote port to be used for reverse port-forward.
      remote:

  # The command to run the local application. If not present, then the local application should be started manually.
  command:

  # Specifies restarting policy for the local application. By default, the local application will be restarting
  # infinitely with 1000ms between attempts.
  restart:
    # Delay in milliseconds between the local application restart attempts. The default value is 1000ms.
    delayMsec: 1000

    # Max number of the local application restarts. Unlimited by default.
    max: .inf

  # The remote Kubernetes resource to proxy traffic from. If specified, this is used instead of `defaultTarget`.
  target:
    # The kind of Kubernetes resource to find.
    kind:

    # The name of the resource, of the specified `kind`. If specified, you must also specify `kind`.
    name:

    # A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with
    # matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.
    podSelector:

    # The name of a container in the target. Specify this if the target contains more than one container and the main
    # container is not the first container in the spec.
    containerName:

# The repository URL to fetch the chart from. Defaults to the "stable" helm repo (https://charts.helm.sh/stable).
repo:

# The Deployment, DaemonSet or StatefulSet or Pod that Garden should regard as the _Garden service_ in this module
# (not to be confused with Kubernetes Service resources).
#
# This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the `kind` and `name` fields,
# or a Pod via the `podSelector` field.
#
# Because a Helm chart can contain any number of Kubernetes resources, this needs to be specified for certain Garden
# features and commands to work.
serviceResource:
  # The type of Kubernetes resource to sync files to.
  kind: Deployment

  # The name of a container in the target. Specify this if the target contains more than one container and the main
  # container is not the first container in the spec.
  containerName:

  # A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with
  # matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.
  podSelector:

  # The name of the resource to sync to. If the chart contains a single resource of the specified Kind,
  # this can be omitted.
  #
  # This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'.
  # This allows you to easily match the dynamic names given by Helm. In most cases you should copy this
  # directly from the template in question in order to match it. Note that you may need to add single quotes around
  # the string for the YAML to be parsed correctly.
  name:

  # The Garden module that contains the sources for the container. This needs to be specified under `serviceResource`
  # in order to enable syncing, but is not necessary for tasks and tests. Must be a `container` module.
  #
  # _Note: If you specify a module here, you don't need to specify it additionally under `build.dependencies`._
  containerModule:

# Set this to true if the chart should only be built, but not deployed as a service. Use this, for example, if the
# chart should only be used as a base for other modules.
skipDeploy: false

# The task definitions for this module.
tasks:
  - # The name of the task.
    name:

    # A description of the task.
    description:

    # The names of any tasks that must be executed, and the names of any services that must be running, before this
    # task is executed.
    dependencies: []

    # Set this to `true` to disable the task. You can use this with conditional template strings to enable/disable
    # tasks based on, for example, the current environment or other variables (e.g. `enabled: ${environment.name !=
    # "prod"}`). This can be handy when you only want certain tasks to run in specific environments, e.g. only for
    # development.
    #
    # Disabling a task means that it will not be run, and will also be ignored if it is declared as a runtime
    # dependency for another service, test or task.
    #
    # Note however that template strings referencing the task's outputs (i.e. runtime outputs) will fail to resolve
    # when the task is disabled, so you need to make sure to provide alternate values for those if you're using them,
    # using conditional expressions.
    disabled: false

    # Maximum duration (in seconds) of the task's execution.
    timeout: 600

    # Set to false if you don't want the Runs's result to be cached. Use this if the Run needs to be run any time your
    # project (or one or more of the Run's dependants) is deployed. Otherwise the Run is only re-run when its version
    # changes, or when you run `garden run`.
    cacheResult: true

    # The command/entrypoint used to run inside the container.
    command:

    # The arguments to pass to the command/entrypoint used for execution.
    args:

    # Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with
    # `GARDEN`) and values must be primitives or references to secrets.
    env: {}

    # Specify artifacts to copy out of the container after the run. The artifacts are stored locally under
    # the `.garden/artifacts` directory.
    artifacts:
      - # A POSIX-style path or glob to copy. Must be an absolute path. May contain wildcards.
        source:

        # A POSIX-style path to copy the artifacts to, relative to the project artifacts directory at
        # `.garden/artifacts`.
        target: .

    # A valid Kubernetes namespace name. Must be a valid RFC1035/RFC1123 (DNS) label (may contain lowercase letters,
    # numbers and dashes, must start with a letter, and cannot end with a dash) and must not be longer than 63
    # characters.
    namespace:

    # The Deployment, DaemonSet or StatefulSet or Pod that Garden should use to execute this task.
    # If not specified, the `serviceResource` configured on the module will be used. If neither is specified,
    # an error will be thrown.
    #
    # This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the `kind` and `name`
    # fields, or a Pod via the `podSelector` field.
    #
    # The following pod spec fields from the service resource will be used (if present) when executing the task:
    #
    # **Warning**: Garden will retain `configMaps` and `secrets` as volumes, but remove `persistentVolumeClaim`
    # volumes from the Pod spec, as they might already be mounted.
    # * `affinity`
    # * `automountServiceAccountToken`
    # * `containers`
    # * `dnsConfig`
    # * `dnsPolicy`
    # * `enableServiceLinks`
    # * `hostAliases`
    # * `hostIPC`
    # * `hostNetwork`
    # * `hostPID`
    # * `hostname`
    # * `imagePullSecrets`
    # * `nodeName`
    # * `nodeSelector`
    # * `overhead`
    # * `preemptionPolicy`
    # * `priority`
    # * `priorityClassName`
    # * `runtimeClassName`
    # * `schedulerName`
    # * `securityContext`
    # * `serviceAccount`
    # * `serviceAccountName`
    # * `shareProcessNamespace`
    # * `subdomain`
    # * `tolerations`
    # * `topologySpreadConstraints`
    # * `volumes`
    resource:
      # The type of Kubernetes resource to sync files to.
      kind: Deployment

      # The name of a container in the target. Specify this if the target contains more than one container and the
      # main container is not the first container in the spec.
      containerName:

      # A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod
      # with matching labels will be picked as a target, so make sure the labels will always match a specific Pod
      # type.
      podSelector:

      # The name of the resource to sync to. If the chart contains a single resource of the specified Kind,
      # this can be omitted.
      #
      # This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'.
      # This allows you to easily match the dynamic names given by Helm. In most cases you should copy this
      # directly from the template in question in order to match it. Note that you may need to add single quotes
      # around
      # the string for the YAML to be parsed correctly.
      name:

      # The Garden module that contains the sources for the container. This needs to be specified under
      # `serviceResource` in order to enable syncing, but is not necessary for tasks and tests. Must be a `container`
      # module.
      #
      # _Note: If you specify a module here, you don't need to specify it additionally under `build.dependencies`._
      containerModule:

# The test suite definitions for this module.
tests:
  - # The name of the test.
    name:

    # The names of any services that must be running, and the names of any tasks that must be executed, before the
    # test is run.
    dependencies: []

    # Set this to `true` to disable the test. You can use this with conditional template strings to
    # enable/disable tests based on, for example, the current environment or other variables (e.g.
    # `enabled: ${environment.name != "prod"}`). This is handy when you only want certain tests to run in
    # specific environments, e.g. only during CI.
    disabled: false

    # Maximum duration (in seconds) of the test run.
    timeout: 600

    # The command/entrypoint used to run the test inside the container.
    command:

    # The arguments to pass to the container used for testing.
    args:

    # Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with
    # `GARDEN`) and values must be primitives or references to secrets.
    env: {}

    # Specify artifacts to copy out of the container after the run. The artifacts are stored locally under
    # the `.garden/artifacts` directory.
    artifacts:
      - # A POSIX-style path or glob to copy. Must be an absolute path. May contain wildcards.
        source:

        # A POSIX-style path to copy the artifacts to, relative to the project artifacts directory at
        # `.garden/artifacts`.
        target: .

    # The Deployment, DaemonSet or StatefulSet or Pod that Garden should use to execute this test suite.
    # If not specified, the `serviceResource` configured on the module will be used. If neither is specified,
    # an error will be thrown.
    #
    # This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the `kind` and `name`
    # fields, or a Pod via the `podSelector` field.
    #
    # The following pod spec fields from the service resource will be used (if present) when executing the test suite:
    #
    # **Warning**: Garden will retain `configMaps` and `secrets` as volumes, but remove `persistentVolumeClaim`
    # volumes from the Pod spec, as they might already be mounted.
    # * `affinity`
    # * `automountServiceAccountToken`
    # * `containers`
    # * `dnsConfig`
    # * `dnsPolicy`
    # * `enableServiceLinks`
    # * `hostAliases`
    # * `hostIPC`
    # * `hostNetwork`
    # * `hostPID`
    # * `hostname`
    # * `imagePullSecrets`
    # * `nodeName`
    # * `nodeSelector`
    # * `overhead`
    # * `preemptionPolicy`
    # * `priority`
    # * `priorityClassName`
    # * `runtimeClassName`
    # * `schedulerName`
    # * `securityContext`
    # * `serviceAccount`
    # * `serviceAccountName`
    # * `shareProcessNamespace`
    # * `subdomain`
    # * `tolerations`
    # * `topologySpreadConstraints`
    # * `volumes`
    resource:
      # The type of Kubernetes resource to sync files to.
      kind: Deployment

      # The name of a container in the target. Specify this if the target contains more than one container and the
      # main container is not the first container in the spec.
      containerName:

      # A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod
      # with matching labels will be picked as a target, so make sure the labels will always match a specific Pod
      # type.
      podSelector:

      # The name of the resource to sync to. If the chart contains a single resource of the specified Kind,
      # this can be omitted.
      #
      # This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'.
      # This allows you to easily match the dynamic names given by Helm. In most cases you should copy this
      # directly from the template in question in order to match it. Note that you may need to add single quotes
      # around
      # the string for the YAML to be parsed correctly.
      name:

      # The Garden module that contains the sources for the container. This needs to be specified under
      # `serviceResource` in order to enable syncing, but is not necessary for tasks and tests. Must be a `container`
      # module.
      #
      # _Note: If you specify a module here, you don't need to specify it additionally under `build.dependencies`._
      containerModule:

# The chart version to deploy.
version:

Configuration Keys

kind

Type	Allowed Values	Default	Required
string	"Module"	"Module"	Yes

type

The type of this module.

Type	Required
string	Yes

Example:

type: "container"

name

The name of this module.

Type	Required
string	Yes

Example:

name: "my-sweet-module"

build

Specify how to build the module. Note that plugins may define additional keys on this object.

Type	Default	Required
object	{"dependencies":[]}	No

build.dependencies[]

build > dependencies

A list of modules that must be built before this module is built.

Type	Default	Required
array[object]	[]	No

Example:

build:
  ...
  dependencies:
    - name: some-other-module-name

build.dependencies[].name

build > dependencies > name

Module name to build ahead of this module.

Type	Required
string	Yes

build.dependencies[].copy[]

build > dependencies > copy

Specify one or more files or directories to copy from the built dependency to this module.

Type	Default	Required
array[object]	[]	No

build.dependencies[].copy[].source

build > dependencies > copy > source

POSIX-style path or filename of the directory or file(s) to copy to the target.

Type	Required
posixPath	Yes

build.dependencies[].copy[].target

build > dependencies > copy > target

POSIX-style path or filename to copy the directory or file(s), relative to the build directory. Defaults to the same as source path.

Type	Required
posixPath	No

build.timeout

build > timeout

Maximum time in seconds to wait for build to finish.

Type	Default	Required
number	600	No

local

If set to true, Garden will run the build command, services, tests, and tasks in the module source directory, instead of in the Garden build directory (under .garden/build/).

Garden will therefore not stage the build for local modules. This means that include/exclude filters and ignore files are not applied to local modules, except to calculate the module/action versions.

If you use use build.dependencies[].copy for one or more build dependencies of this module, the copied files will be copied to the module source directory (instead of the build directory, as is the default case when local = false).

Note: This maps to the buildAtSource option in this module's generated Build action (if any).

Type	Default	Required
boolean	false	No

description

A description of the module.

Type	Required
string	No

disabled

Set this to true to disable the module. You can use this with conditional template strings to disable modules based on, for example, the current environment or other variables (e.g. disabled: ${environment.name == "prod"}). This can be handy when you only need certain modules for specific environments, e.g. only for development.

Disabling a module means that any services, tasks and tests contained in it will not be deployed or run. It also means that the module is not built unless it is declared as a build dependency by another enabled module (in which case building this module is necessary for the dependant to be built).

If you disable the module, and its services, tasks or tests are referenced as runtime dependencies, Garden will automatically ignore those dependency declarations. Note however that template strings referencing the module's service or task outputs (i.e. runtime outputs) will fail to resolve when the module is disabled, so you need to make sure to provide alternate values for those if you're using them, using conditional expressions.

Type	Default	Required
boolean	false	No

include[]

Specify a list of POSIX-style paths or globs that should be regarded as the source files for this module. Files that do not match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also exclude files using the exclude field or by placing .gardenignore files in your source tree, which use the same format as .gitignore files. See the Configuration Files guide for details.

Also note that specifying an empty list here means no sources should be included.

If neither include nor exclude is set, and the module has local chart sources, Garden automatically sets include to: ["*", "charts/**/*", "templates/**/*"].

If neither include nor exclude is set and the module specifies a remote chart, Garden automatically sets ìnclude to [].

Type	Required
array[posixPath]	No

Example:

include:
  - Dockerfile
  - my-app.js

exclude[]

Specify a list of POSIX-style paths or glob patterns that should be excluded from the module. Files that match these paths or globs are excluded when computing the version of the module, when responding to filesystem watch events, and when staging builds.

Note that you can also explicitly include files using the include field. If you also specify the include field, the files/patterns specified here are filtered from the files matched by include. See the Configuration Files guide for details.

Unlike the scan.exclude field in the project config, the filters here have no effect on which files and directories are watched for changes. Use the project scan.exclude field to affect those, if you have large directories that should not be watched for changes.

Type	Required
array[posixPath]	No

Example:

exclude:
  - tmp/**/*
  - '*.log'

repositoryUrl

A remote repository URL. Currently only supports git servers. Must contain a hash suffix pointing to a specific branch or tag, with the format: #<branch|tag>

Garden will import the repository source code into this module, but read the module's config from the local garden.yml file.

Type	Required
gitUrl | string	No

Example:

repositoryUrl: "git+https://github.com/org/repo.git#v2.0"

allowPublish

When false, disables pushing this module to remote registries via the publish command.

Type	Default	Required
boolean	true	No

generateFiles[]

A list of files to write to the module directory when resolving this module. This is useful to automatically generate (and template) any supporting files needed for the module.

Type	Default	Required
array[object]	[]	No

generateFiles[].sourcePath

generateFiles > sourcePath

POSIX-style filename to read the source file contents from, relative to the path of the module (or the ConfigTemplate configuration file if one is being applied). This file may contain template strings, much like any other field in the configuration.

Type	Required
posixPath	No

generateFiles[].targetPath

generateFiles > targetPath

POSIX-style filename to write the resolved file contents to, relative to the path of the module source directory (for remote modules this means the root of the module repository, otherwise the directory of the module configuration).

Note that any existing file with the same name will be overwritten. If the path contains one or more directories, they will be automatically created if missing.

Type	Required
posixPath	Yes

generateFiles[].resolveTemplates

generateFiles > resolveTemplates

By default, Garden will attempt to resolve any Garden template strings in source files. Set this to false to skip resolving template strings. Note that this does not apply when setting the value field, since that's resolved earlier when parsing the configuration.

Type	Default	Required
boolean	true	No

generateFiles[].value

generateFiles > value

The desired file contents as a string.

Type	Required
string	No

variables

A map of variables scoped to this particular module. These are resolved before any other parts of the module configuration and take precedence over project-scoped variables. They may reference project-scoped variables, and generally use any template strings normally allowed when resolving modules.

Type	Required
object	No

varfile

Specify a path (relative to the module root) to a file containing variables, that we apply on top of the module-level variables field.

The format of the files is determined by the configured file's extension:

• .yaml/.yml - YAML. The file must consist of a YAML document, which must be a map (dictionary). Keys may contain any value type. YAML format is used by default.

• .env - Standard "dotenv" format, as defined by dotenv.

• .json - JSON. Must contain a single JSON object (not an array).

NOTE: The default varfile format was changed to YAML in Garden v0.13, since YAML allows for definition of nested objects and arrays.

To use different module-level varfiles in different environments, you can template in the environment name to the varfile name, e.g. varfile: "my-module.${environment.name}.env (this assumes that the corresponding varfiles exist).

Type	Required
posixPath	No

Example:

varfile: "my-module.env"

namespace

A valid Kubernetes namespace name. Must be a valid RFC1035/RFC1123 (DNS) label (may contain lowercase letters, numbers and dashes, must start with a letter, and cannot end with a dash) and must not be longer than 63 characters.

Type	Required
string	No

portForwards[]

Manually specify port forwards that Garden should set up when deploying in dev or watch mode. If specified, these override the auto-detection of forwardable ports, so you'll need to specify the full list of port forwards to create.

Type	Required
array[object]	No

portForwards[].name

portForwards > name

An identifier to describe the port forward.

Type	Required
string	No

portForwards[].resource

portForwards > resource

The full resource kind and name to forward to, e.g. Service/my-service or Deployment/my-deployment. Note that Garden will not validate this ahead of attempting to start the port forward, so you need to make sure this is correctly set. The types of resources supported will match that of the kubectl port-forward CLI command.

Type	Required
string	Yes

portForwards[].targetPort

portForwards > targetPort

The port number on the remote resource to forward to.

Type	Required
number	Yes

portForwards[].localPort

portForwards > localPort

The preferred local port to forward from. If none is set, a random port is chosen. If the specified port is not available, a warning is shown and a random port chosen instead.

Type	Required
number	No

releaseName

Optionally override the release name used when installing (defaults to the Deploy name).

Type	Required
string	No

timeout

Time in seconds to wait for Helm to complete any individual Kubernetes operation (like Jobs for hooks).

Type	Default	Required
number	300	No

values

Map of values to pass to Helm when rendering the templates. May include arrays and nested objects. When specified, these take precedence over the values in the values.yaml file (or the files specified in valueFiles).

Type	Default	Required
object	{}	No

valueFiles[]

Specify value files to use when rendering the Helm chart. These will take precedence over the values.yaml file bundled in the Helm chart, and should be specified in ascending order of precedence. Meaning, the last file in this list will have the highest precedence.

If you also specify keys under the values field, those will effectively be added as another file at the end of this list, so they will take precedence over other files listed here.

Note that the paths here should be relative to the config root, and the files should be contained in this action config's directory.

Type	Default	Required
array[posixPath]	[]	No

atomicInstall

Whether to set the --atomic flag during installs and upgrades. Set to true if you'd like the changes applied to be reverted on failure. Set to false if e.g. you want to see more information about failures and then manually roll back, instead of having Helm do it automatically on failure.

Note that setting atomic to true implies wait.

Type	Default	Required
boolean	false	No

base

The name of another helm module to use as a base for this one. Use this to re-use a Helm chart across multiple services. For example, you might have an organization-wide base chart for certain types of services. If set, this module will by default inherit the following properties from the base module: serviceResource, values Each of those can be overridden in this module. They will be merged with a JSON Merge Patch (RFC 7396).

Type	Required
string	No

Example:

base: "my-base-chart"

chart

A valid Helm chart name or URI (same as you'd input to helm install) Required if the action doesn't contain the Helm chart itself.

Type	Required
string	No

Example:

chart: "ingress-nginx"

chartPath

The path, relative to the module path, to the chart sources (i.e. where the Chart.yaml file is, if any). Not used when base is specified.

Type	Default	Required
posixPath	"."	No

dependencies[]

List of names of services that should be deployed before this chart.

Type	Default	Required
array[string]	[]	No

sync

Specifies which files or directories to sync to which paths inside the running containers of the service when it's in sync mode, and overrides for the container command and/or arguments.

Note that serviceResource must also be specified to enable sync.

Sync is enabled by setting the --sync flag on the garden deploy command.

See the Code Synchronization guide for more information.

Type	Required
object	No

sync.args[]

sync > args

Override the default container arguments when in sync mode.

Type	Required
array[string]	No

sync.command[]

sync > command

Override the default container command (i.e. entrypoint) when in sync mode.

Type	Required
array[string]	No

sync.paths[]

sync > paths

Specify one or more source files or directories to automatically sync with the running container.

Type	Required
array[object]	No

sync.paths[].source

sync > paths > source

Path to a local directory to be synchronized with the target. This should generally be a templated path to another action's source path (e.g. ${actions.build.my-container-image.sourcePath}), or a relative path. If a path is hard-coded, we recommend sticking with relative paths here, and using forward slashes (/) as a delimiter, as Windows-style paths with back slashes (\) and absolute paths will work on some platforms, but they are not portable and will not work for users on other platforms. Defaults to the Deploy action's config's directory if no value is provided.

Type	Default	Required
string	"."	No

Example:

sync:
  ...
  paths:
    - source: "src"

sync.paths[].target

sync > paths > target

POSIX-style absolute path to sync to inside the container. The root path (i.e. "/") is not allowed.

Type	Required
posixPath	Yes

Example:

sync:
  ...
  paths:
    - target: "/app/src"

sync.paths[].exclude[]

sync > paths > exclude

Specify a list of POSIX-style paths or glob patterns that should be excluded from the sync.

.git directories and .garden directories are always ignored.

Type	Required
array[posixPath]	No

Example:

sync:
  ...
  paths:
    - exclude:
        - dist/**/*
        - '*.log'

sync.paths[].mode

sync > paths > mode

The sync mode to use for the given paths. See the Code Synchronization guide for details.

Type	Allowed Values	Default	Required
string	"one-way", "one-way-safe", "one-way-replica", "one-way-reverse", "one-way-replica-reverse", "two-way", "two-way-safe", "two-way-resolved"	"one-way-safe"	Yes

sync.paths[].defaultFileMode

sync > paths > defaultFileMode

The default permission bits, specified as an octal, to set on files at the sync target. Defaults to 0o644 (user can read/write, everyone else can read). See the Mutagen docs for more information.

Type	Default	Required
number	0o644	No

sync.paths[].defaultDirectoryMode

sync > paths > defaultDirectoryMode

The default permission bits, specified as an octal, to set on directories at the sync target. Defaults to 0o755 (user can read/write, everyone else can read). See the Mutagen docs for more information.

Type	Default	Required
number	0o755	No

sync.paths[].defaultOwner

sync > paths > defaultOwner

Set the default owner of files and directories at the target. Specify either an integer ID or a string name. See the Mutagen docs for more information.

Type	Required
number | string	No

sync.paths[].defaultGroup

sync > paths > defaultGroup

Set the default group on files and directories at the target. Specify either an integer ID or a string name. See the Mutagen docs for more information.

Type	Required
number | string	No

sync.containerName

sync > containerName

Optionally specify the name of a specific container to sync to. If not specified, the first container in the workload is used.

Type	Required
string	No

localMode

[EXPERIMENTAL] Configures the local application which will send and receive network requests instead of the target resource specified by localMode.target or defaultTarget. One of those fields must be specified to enable local mode for the action.

The selected container of the target Kubernetes resource will be replaced by a proxy container which runs an SSH server to proxy requests. Reverse port-forwarding will be automatically configured to route traffic to the locally run application and back.

Local mode is enabled by setting the --local option on the garden deploy command. Local mode always takes the precedence over sync mode if there are any conflicting service names.

Health checks are disabled for services running in local mode.

See the Local Mode guide for more information.

Note! This feature is still experimental. Some incompatible changes can be made until the first non-experimental release.

Type	Required
object	No

localMode.ports[]

localMode > ports

The reverse port-forwards configuration for the local application.

Type	Required
array[object]	No

localMode.ports[].local

localMode > ports > local

The local port to be used for reverse port-forward.

Type	Required
number	No

localMode.ports[].remote

localMode > ports > remote

The remote port to be used for reverse port-forward.

Type	Required
number	No

localMode.command[]

localMode > command

The command to run the local application. If not present, then the local application should be started manually.

Type	Required
array[string]	No

localMode.restart

localMode > restart

Specifies restarting policy for the local application. By default, the local application will be restarting infinitely with 1000ms between attempts.

Type	Default	Required
object	{"delayMsec":1000,"max":null}	No

localMode.restart.delayMsec

localMode > restart > delayMsec

Delay in milliseconds between the local application restart attempts. The default value is 1000ms.

Type	Default	Required
number	1000	No

localMode.restart.max

localMode > restart > max

Max number of the local application restarts. Unlimited by default.

Type	Default	Required
number	null	No

localMode.target

localMode > target

The remote Kubernetes resource to proxy traffic from. If specified, this is used instead of defaultTarget.

Type	Required
object	No

localMode.target.kind

localMode > target > kind

The kind of Kubernetes resource to find.

Type	Allowed Values	Required
string	"Deployment", "DaemonSet", "StatefulSet"	Yes

localMode.target.name

localMode > target > name

The name of the resource, of the specified kind. If specified, you must also specify kind.

Type	Required
string	No

localMode.target.podSelector

localMode > target > podSelector

A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.

Type	Required
object	No

localMode.target.containerName

localMode > target > containerName

The name of a container in the target. Specify this if the target contains more than one container and the main container is not the first container in the spec.

Type	Required
string	No

repo

The repository URL to fetch the chart from. Defaults to the "stable" helm repo (https://charts.helm.sh/stable).

Type	Required
string	No

serviceResource

The Deployment, DaemonSet or StatefulSet or Pod that Garden should regard as the Garden service in this module (not to be confused with Kubernetes Service resources).

This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the kind and name fields, or a Pod via the podSelector field.

Because a Helm chart can contain any number of Kubernetes resources, this needs to be specified for certain Garden features and commands to work.

Type	Required
object	No

serviceResource.kind

serviceResource > kind

The type of Kubernetes resource to sync files to.

Type	Allowed Values	Default	Required
string	"Deployment", "DaemonSet", "StatefulSet"	"Deployment"	Yes

serviceResource.containerName

serviceResource > containerName

The name of a container in the target. Specify this if the target contains more than one container and the main container is not the first container in the spec.

Type	Required
string	No

serviceResource.podSelector

serviceResource > podSelector

A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.

Type	Required
object	No

serviceResource.name

serviceResource > name

The name of the resource to sync to. If the chart contains a single resource of the specified Kind, this can be omitted.

This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'. This allows you to easily match the dynamic names given by Helm. In most cases you should copy this directly from the template in question in order to match it. Note that you may need to add single quotes around the string for the YAML to be parsed correctly.

Type	Required
string	No

serviceResource.containerModule

serviceResource > containerModule

The Garden module that contains the sources for the container. This needs to be specified under serviceResource in order to enable syncing, but is not necessary for tasks and tests. Must be a container module.

Note: If you specify a module here, you don't need to specify it additionally under build.dependencies.

Type	Required
string	No

Example:

serviceResource:
  ...
  containerModule: "my-container-module"

skipDeploy

Set this to true if the chart should only be built, but not deployed as a service. Use this, for example, if the chart should only be used as a base for other modules.

Type	Default	Required
boolean	false	No

tasks[]

The task definitions for this module.

Type	Default	Required
array[object]	[]	No

tasks[].name

tasks > name

The name of the task.

Type	Required
string	Yes

tasks[].description

tasks > description

A description of the task.

Type	Required
string	No

tasks[].dependencies[]

tasks > dependencies

The names of any tasks that must be executed, and the names of any services that must be running, before this task is executed.

Type	Default	Required
array[string]	[]	No

tasks[].disabled

tasks > disabled

Set this to true to disable the task. You can use this with conditional template strings to enable/disable tasks based on, for example, the current environment or other variables (e.g. enabled: ${environment.name != "prod"}). This can be handy when you only want certain tasks to run in specific environments, e.g. only for development.

Disabling a task means that it will not be run, and will also be ignored if it is declared as a runtime dependency for another service, test or task.

Note however that template strings referencing the task's outputs (i.e. runtime outputs) will fail to resolve when the task is disabled, so you need to make sure to provide alternate values for those if you're using them, using conditional expressions.

Type	Default	Required
boolean	false	No

tasks[].timeout

tasks > timeout

Maximum duration (in seconds) of the task's execution.

Type	Default	Required
number	600	No

tasks[].cacheResult

tasks > cacheResult

Set to false if you don't want the Runs's result to be cached. Use this if the Run needs to be run any time your project (or one or more of the Run's dependants) is deployed. Otherwise the Run is only re-run when its version changes, or when you run garden run.

Type	Default	Required
boolean	true	No

tasks[].command[]

tasks > command

The command/entrypoint used to run inside the container.

Type	Required
array[string]	No

Example:

tasks:
  - command:
      - /bin/sh
      - '-c'

tasks[].args[]

tasks > args

The arguments to pass to the command/entrypoint used for execution.

Type	Required
array[string]	No

Example:

tasks:
  - args:
      - rake
      - db:migrate

tasks[].env

tasks > env

Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with GARDEN) and values must be primitives or references to secrets.

Type	Default	Required
object	{}	No

Example:

tasks:
  - env:
        - MY_VAR: some-value
          MY_SECRET_VAR:
            secretRef:
              name: my-secret
              key: some-key
        - {}

tasks[].artifacts[]

tasks > artifacts

Specify artifacts to copy out of the container after the run. The artifacts are stored locally under the .garden/artifacts directory.

Type	Default	Required
array[object]	[]	No

tasks[].artifacts[].source

tasks > artifacts > source

A POSIX-style path or glob to copy. Must be an absolute path. May contain wildcards.

Type	Required
posixPath	Yes

Example:

tasks:
  - artifacts:
      - source: "/output/**/*"

tasks[].artifacts[].target

tasks > artifacts > target

A POSIX-style path to copy the artifacts to, relative to the project artifacts directory at .garden/artifacts.

Type	Default	Required
posixPath	"."	No

Example:

tasks:
  - artifacts:
      - target: "outputs/foo/"

tasks[].namespace

tasks > namespace

A valid Kubernetes namespace name. Must be a valid RFC1035/RFC1123 (DNS) label (may contain lowercase letters, numbers and dashes, must start with a letter, and cannot end with a dash) and must not be longer than 63 characters.

Type	Required
string	No

tasks[].resource

tasks > resource

The Deployment, DaemonSet or StatefulSet or Pod that Garden should use to execute this task. If not specified, the serviceResource configured on the module will be used. If neither is specified, an error will be thrown.

This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the kind and name fields, or a Pod via the podSelector field.

The following pod spec fields from the service resource will be used (if present) when executing the task:

Warning: Garden will retain configMaps and secrets as volumes, but remove persistentVolumeClaim volumes from the Pod spec, as they might already be mounted.

• affinity

• automountServiceAccountToken

• containers

• dnsConfig

• dnsPolicy

• enableServiceLinks

• hostAliases

• hostIPC

• hostNetwork

• hostPID

• hostname

• imagePullSecrets

• nodeName

• nodeSelector

• overhead

• preemptionPolicy

• priority

• priorityClassName

• runtimeClassName

• schedulerName

• securityContext

• serviceAccount

• serviceAccountName

• shareProcessNamespace

• subdomain

• tolerations

• topologySpreadConstraints

• volumes

Type	Required
object	No

tasks[].resource.kind

tasks > resource > kind

The type of Kubernetes resource to sync files to.

Type	Allowed Values	Default	Required
string	"Deployment", "DaemonSet", "StatefulSet"	"Deployment"	Yes

tasks[].resource.containerName

tasks > resource > containerName

The name of a container in the target. Specify this if the target contains more than one container and the main container is not the first container in the spec.

Type	Required
string	No

tasks[].resource.podSelector

tasks > resource > podSelector

A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.

Type	Required
object	No

tasks[].resource.name

tasks > resource > name

The name of the resource to sync to. If the chart contains a single resource of the specified Kind, this can be omitted.

This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'. This allows you to easily match the dynamic names given by Helm. In most cases you should copy this directly from the template in question in order to match it. Note that you may need to add single quotes around the string for the YAML to be parsed correctly.

Type	Required
string	No

tasks[].resource.containerModule

tasks > resource > containerModule

The Garden module that contains the sources for the container. This needs to be specified under serviceResource in order to enable syncing, but is not necessary for tasks and tests. Must be a container module.

Note: If you specify a module here, you don't need to specify it additionally under build.dependencies.

Type	Required
string	No

Example:

tasks:
  - resource:
      ...
      containerModule: "my-container-module"

tests[]

The test suite definitions for this module.

Type	Default	Required
array[object]	[]	No

tests[].name

tests > name

The name of the test.

Type	Required
string	Yes

tests[].dependencies[]

tests > dependencies

The names of any services that must be running, and the names of any tasks that must be executed, before the test is run.

Type	Default	Required
array[string]	[]	No

tests[].disabled

tests > disabled

Set this to true to disable the test. You can use this with conditional template strings to enable/disable tests based on, for example, the current environment or other variables (e.g. enabled: ${environment.name != "prod"}). This is handy when you only want certain tests to run in specific environments, e.g. only during CI.

Type	Default	Required
boolean	false	No

tests[].timeout

tests > timeout

Maximum duration (in seconds) of the test run.

Type	Default	Required
number	600	No

tests[].command[]

tests > command

The command/entrypoint used to run the test inside the container.

Type	Required
array[string]	No

Example:

tests:
  - command:
      - /bin/sh
      - '-c'

tests[].args[]

tests > args

The arguments to pass to the container used for testing.

Type	Required
array[string]	No

Example:

tests:
  - args:
      - npm
      - test

tests[].env

tests > env

Key/value map of environment variables. Keys must be valid POSIX environment variable names (must not start with GARDEN) and values must be primitives or references to secrets.

Type	Default	Required
object	{}	No

Example:

tests:
  - env:
        - MY_VAR: some-value
          MY_SECRET_VAR:
            secretRef:
              name: my-secret
              key: some-key
        - {}

tests[].artifacts[]

tests > artifacts

Specify artifacts to copy out of the container after the run. The artifacts are stored locally under the .garden/artifacts directory.

Type	Default	Required
array[object]	[]	No

tests[].artifacts[].source

tests > artifacts > source

A POSIX-style path or glob to copy. Must be an absolute path. May contain wildcards.

Type	Required
posixPath	Yes

Example:

tests:
  - artifacts:
      - source: "/output/**/*"

tests[].artifacts[].target

tests > artifacts > target

A POSIX-style path to copy the artifacts to, relative to the project artifacts directory at .garden/artifacts.

Type	Default	Required
posixPath	"."	No

Example:

tests:
  - artifacts:
      - target: "outputs/foo/"

tests[].resource

tests > resource

The Deployment, DaemonSet or StatefulSet or Pod that Garden should use to execute this test suite. If not specified, the serviceResource configured on the module will be used. If neither is specified, an error will be thrown.

This can either reference a workload (i.e. a Deployment, DaemonSet or StatefulSet) via the kind and name fields, or a Pod via the podSelector field.

The following pod spec fields from the service resource will be used (if present) when executing the test suite:

Warning: Garden will retain configMaps and secrets as volumes, but remove persistentVolumeClaim volumes from the Pod spec, as they might already be mounted.

• affinity

• automountServiceAccountToken

• containers

• dnsConfig

• dnsPolicy

• enableServiceLinks

• hostAliases

• hostIPC

• hostNetwork

• hostPID

• hostname

• imagePullSecrets

• nodeName

• nodeSelector

• overhead

• preemptionPolicy

• priority

• priorityClassName

• runtimeClassName

• schedulerName

• securityContext

• serviceAccount

• serviceAccountName

• shareProcessNamespace

• subdomain

• tolerations

• topologySpreadConstraints

• volumes

Type	Required
object	No

tests[].resource.kind

tests > resource > kind

The type of Kubernetes resource to sync files to.

Type	Allowed Values	Default	Required
string	"Deployment", "DaemonSet", "StatefulSet"	"Deployment"	Yes

tests[].resource.containerName

tests > resource > containerName

The name of a container in the target. Specify this if the target contains more than one container and the main container is not the first container in the spec.

Type	Required
string	No

tests[].resource.podSelector

tests > resource > podSelector

A map of string key/value labels to match on any Pods in the namespace. When specified, a random ready Pod with matching labels will be picked as a target, so make sure the labels will always match a specific Pod type.

Type	Required
object	No

tests[].resource.name

tests > resource > name

The name of the resource to sync to. If the chart contains a single resource of the specified Kind, this can be omitted.

This can include a Helm template string, e.g. '{{ template "my-chart.fullname" . }}'. This allows you to easily match the dynamic names given by Helm. In most cases you should copy this directly from the template in question in order to match it. Note that you may need to add single quotes around the string for the YAML to be parsed correctly.

Type	Required
string	No

tests[].resource.containerModule

tests > resource > containerModule

The Garden module that contains the sources for the container. This needs to be specified under serviceResource in order to enable syncing, but is not necessary for tasks and tests. Must be a container module.

Note: If you specify a module here, you don't need to specify it additionally under build.dependencies.

Type	Required
string	No

Example:

tests:
  - resource:
      ...
      containerModule: "my-container-module"

version

The chart version to deploy.

Type	Required
string	No

Outputs

Module Outputs

The following keys are available via the ${modules.<module-name>} template string key for helm modules.

${modules.<module-name>.buildPath}

The build path of the module.

Type
string

Example:

my-variable: ${modules.my-module.buildPath}

${modules.<module-name>.name}

The name of the module.

Type
string

${modules.<module-name>.path}

The source path of the module.

Type
string

Example:

my-variable: ${modules.my-module.path}

${modules.<module-name>.var.*}

A map of all variables defined in the module.

Type	Default
object	{}

${modules.<module-name>.var.<variable-name>}

Type
string | number | boolean | link | array[link]

${modules.<module-name>.version}

The current version of the module.

Type
string

Example:

my-variable: ${modules.my-module.version}

${modules.<module-name>.outputs.release-name}

The Helm release name of the service.

Type
string

Service Outputs

The following keys are available via the ${runtime.services.<service-name>} template string key for helm module services. Note that these are only resolved when deploying/running dependants of the service, so they are not usable for every field.

${runtime.services.<service-name>.version}

The current version of the service.

Type
string

Example:

my-variable: ${runtime.services.my-service.version}

Task Outputs

The following keys are available via the ${runtime.tasks.<task-name>} template string key for helm module tasks. Note that these are only resolved when deploying/running dependants of the task, so they are not usable for every field.

${runtime.tasks.<task-name>.version}

The current version of the task.

Type
string

Example:

my-variable: ${runtime.tasks.my-tasks.version}